衬钽管石墨炉原子吸收法测定痕量镓时基体改进剂的研究及应用

提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。衬钽管使镓的灵敏度提高6倍左右,钒和铜混合基体改进剂不仅能进一步提高灵敏度,而且能提高灰化温度,降低原子化温度,增强抗干扰能力。测定 GSD 标准样品中的镓时,不需对样品进行预分离即可直接进行测定,结果与参考值相符。     

Drift tube investigations on the reactions of O 2 + with CH4 and of CO 2 + with NO in various buffer gases

The influence of internal excitation on the reactions of O ₂ ⁺ + CH₄ and of CO ₂ ⁺ + NO has been investigated using a slow flow drift tube. The rate coefficients for these reactions obtained as a function of relative kinetic energy in various buffer gases like He, Ne, Ar, and Kr showed higher values under conditions where the internal excitation of the reactant ions was enhanced. For both reactions the lowest reactivity at all kinetic energies was observed to occur in He, indicating that He is the least effective buffer for collisionally inducing internal excitation of molecular ions.     

Mechanical properties of SBR-networks: I. Determination of crosslink densities by stress-strain-measurements

The tube model is applied for the treatment of stress-strain measurements on SBR networks. It is shown that this theory allows the separation of crosslink and constraint contributions to the stress-strain behavior and, also, a reliable determination of crosslink densities. The consideration of dynamical contributions is discussed and a special numerical method is developed.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

A stream tube model for miscible flow

A simple theoretical model is described for deriving a 1-dimensional equation for the spreading of a tracer in a steady flow at the field scale. The originality of the model is to use a stochastic appoach not in the 3-dimensional space but in the 1-D space of the stream tubes. The simplicity of calculation comes from the local relationship between permeability and velocity in a 1-D flow. The spreading of a tracer front is due to local variations in the cross-sectional area of the stream tubes, which induces randomness in travel time. The derived transport equation is averaged in the main flow direction. It differs from the standard dispersion equation. The roles of time and space variables are exchanged. This result can be explained by using the statistical theory of Continuous Time Random Walk instead of a standard Random Walk. However, the two equations are very close, since their solutions have the same first and second moments. Dispersivity is found to be equal to the product of the correlation length by the variance of the logarithm of permeability, a result similar to Gelhar's macrodispersion.Nomenclature A total cross-section area of the sample - C (resident) concentration of tracer - D,D ^* dispersion coefficient - F flux of tracer - G probability distribution function for permeability in the stream-tube segments - I tracer intensity (mass crossing a surface per unit time) - K permeability - L length of the medium - M number of stream tubes in the medium - N number of segments along a stream tube - P pressure - Q total flow rate in the sample - a length of an elementary stream-tube segment - g probability distribution function for permeability in the space - i, j indices, tube numbers - q flow rate in each stream tube - s variable cross-section area of a stream tube - t, t time - u front velocity - x space variable in the flow direction - small local variation in time - , _t longitudinal, transverse dispersivity - porosity of the porous medium - correlation length in the permeability field - viscosity of the fluid - time for filling an elementary stream tube segment - standard deviation of a stochastic variable - probability distribution of arrival times (Gaussian)     

Measurements of HO2 uptake coefficient on aqueous (NH4)2SO4 aerosol using aerosol flow tube with LIF system

The γ(HO₂) was elevated with increase of Cu(II) concentrations in aqueous (NH₄)₂SO₄ aerosol. The threshold of Cu(II) concentration was 10^-3 mol/L for the dramatic increase of γ(HO₂) to 0.1, suggesting sensitive γ(HO₂) value to concentration of transition metal ions in aerosol.     

石墨炉原子吸收法中热解涂层石墨管在无标准分析法测定环境样品中铬的应用

本文探讨了热解涂层石墨管测定铬的最佳实验条件,研究了各种酸和干扰物质的基体效应,提出用浓氨水为基体改进剂克服高氯酸的干扰。比较了各原子化温度时的理论和实验特征量。使热解涂层石墨管有可能用于无标准分析法测定各种环境样品中的铬。     

石墨炉原子吸收法测定钒的研究

本文比较了在标准石墨管,热解涂层和全热解石墨管中钒的吸收信号形状。用全热解石墨管和EDTA铵盐作基体改进剂,直接测定水系沉积物中痕量钒。方法的特征量为61pg/0.0044A。     

原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。